| TECHNICAL DATA & OPTIONS |
| Enclosure |
 |
Die-cast aluminium G AL Si12 / DIN 1725 |
| Lid screws |
 |
Stainless steel captive screws |
| Enclosure temperature range |
 |
As per gasket type fitted.
|
| Ingress Protection |
 |
IP 66 / DIN 40050 (On request IP 67) |
IP 66 Gasket
(Standard) |
 |
Thermoplastic Iaprene (silicon-free) gasket fitted into the enclosure lid.
(-40ºC to +120ºC). |
IP 67 Gasket
(On request) |
 |
Option 'PLUS'
Thermoplastic Iaprene (silicon-free) gasket fitted into the enclosure lid.
(-40ºC to +120ºC). |
High Temperature Gasket
(On request) |
 |
Option 'D'
Oil & petrol resistant silicon gasket fitted into the enclosure lid.
(-50ºC to +140ºC). |
| Internal mounting |
 |
Blind hole internal mounting points in the base for mounting your assemblies. |
Condensation Glands - IP 67
(on request) |
 |
Gortex condensation glands can be fitted to the cases on request. These are especially useful when there is a large variance in the operating temperature over a short period, which can result in condensation on the inside of the enclosure. These glands ventilate the case while maintaining IP67 protection. |
| Finish / colour |
 |
Standard - Powder coated silky grey RAL7032
Optional colour - Silver grey RAL 7001 (without extra cost)
Option 'K' - Chromatizing before painting*
Option 'L' - Corrosion proof coating RAL 5009*
Other options- stove-finished structured paint, special colours *
* - at extra cost.
|
| Modifications |
 |
We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation.
More about customising... |
