|
||||||||
| Home | About Us | Enclosures | Technical | Service Desk | News | Contact | ||
| aluTWIN |
  |
|
| aluTWIN AT & ATF | ||
 |
 |
|
| Part No. (click for price!) |
Type | Length | Width | Height (H) | Height (H1) | D | E | Weight | Drawing PDF format |
| 105.100.000 | ATF 100 | 166 | 100 | 55 | 40 | 87 | 87 | 730g | Drawing-PDF |
| 104.100.000 | AT 100 | 165 | 100 | 81 | 40 | 87 | 87 | 770g | Drawing-PDF |
| 104.160.000 | AT 160 | 240 | 160 | 103 | 103 | 142 | 142 | 2,170g | Drawing-PDF |
| 104.162.000 | AT 162 | 240 | 240 | 103 | 103 | 222 | 142 | 2,170g | Drawing-PDF |
| aluTWIN KTE | ||
 |
 |
|
| Part No. (click for price!) |
Type | Length | Width | Height (H) | Height (H1) | fpL | fpW | D | E | Weight | Drawing PDF format |
| 127.160.000 | KTE 160 | 240 | 160 | 120 | 103 | 142 | 116 | 142 | 142 | 2,150g | Drawing-PDF |
| 127.162.000 | KTE 162 | 240 | 240 | 120 | 103 | 142 | 196 | 222 | 142 | 3,080g | Drawing-PDF |
| aluTWIN ACCESSORIES | |||||||
 |
 |
 |
 |
||||
| For Type.. | Internal Mounting Plate |
External Mounting Brackets |
External Case Hinges |
Terminal Mounting Rail |
Double-bit Lid Fasteners |
||
| ATF 100 | 507.100.000 | - | - | 509.064.000 | - | ||
| AT 100 | 507.100.000 | - | - | 509.064.000 | - | ||
| AT 160 | 507.160.010 | 501.000.002 | 510.000.000 | 509.160.000 | 523.000.000 | ||
| AT 162 | 507.162.010 | 501.000.002 | 510.000.000 | 509.160.000 | 523.000.000 | ||
| KTE 160 | 507.160.010 | - | - | - | - | ||
| KTE 162 | 507.162.010 | - | - | - | - | ||
|
ORDER EXAMPLE: Case AT 160 with mounting plate and external hinges Order Case Part No. 104.160.000 + Mounting Plate Part No. 507.160.010 + External Hinges Part No. 510.000.000 We will then supply the case pre-drilled for mounting the hinges along with the mounting plate and two hinge assemblies. |
|||||||
| TECHNICAL DATA & OPTIONS | ||
| Enclosure |  |
Die-cast aluminium G AL Si12 / DIN 1725 |
| Lid screws |  |
Stainless steel captive screws |
| Enclosure temperature range |  |
As per gasket type fitted. |
| Ingress Protection |  |
IP 66 / DIN 40050 (IP 67 on request) |
| IP 66 Gasket (Standard) |
 |
Oil & petrol resistant Chloropren (CR) fitted into the enclosure lid. (-30ºC to +100ºC). |
| High Temperature Gasket (On request) |
 |
Option 'D' Oil & petrol resistant silicon gasket fitted into the enclosure lid. (-50ºC to +140ºC). |
| EMC Gasket (On request) |
 |
Option 'EMV'* - EMC gasket fitted into the enclosure lid. Maintains IP 66 protection. (-30ºC to +100ºC). * - On request at extra cost. |
| Case fastening |  |
Single-channel lid fixings outside of the sealed interior. Symmetrical arrangement of channels makes assembly of square cases even easier. |
| Internal mounting |  |
Blind hole internal mounting points in the lid and the base for mounting your assemblies. |
|
Condensation Glands - IP 67 (on request) |
 |
Gortex condensation glands can be fitted to the cases on request. These are especially useful when there is a large variance in the operating temperature over a short period, which can result in condensation on the inside of the enclosure. These glands ventilate the case while maintaining IP67 protection. |
| Finish / colour |  |
Standard - Powder coated silky grey RAL7032 Optional colour - Silver grey RAL 7001 (without extra cost) Option 'K' - Chromatizing before painting* Option 'L' - Corrosion proof coating RAL 5009* Other options- stove-finished structured paint, special colours * * - at extra cost. |
| Modifications |  |
We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation. More about customising... |
| Request a catalogue | return to enclosures index |
| Home | About Us | Enclosures | Technical | Service Desk | News | Contact | ||
| CALL (01489) 583858 | ||||||||
| Legal notice: copyright © 2000-2004 OKW Enclosures Ltd, UK. All rights reserved. Rev:2004.01.02 Rolec ® is the registered trademark of Rolec Gehäuse-Systeme GmbH, Germany. |
||||||||