|
||||||||
| Home | About Us | Enclosures | Technical | Service Desk | News | Contact | ||
| conFORM |
 |
|
| conFORM ENCLOSURES | ||
 |
 |
 |
| Part No. (click for price!) |
Type | Length | Width | Height | D | E | Weight | Drawing PDF format |
| 111.081.000 | EKF 081 | 79 | 84 | 44 | 63 | 52 | 260g | Drawing-PDF |
| 110.081.000 | EK 081 | 79 | 84 | 67 | 63 | 52 | 320g | Drawing-PDF |
| 111.082.000 | EKF 082 | 129 | 84 | 44 | 113 | 52 | 408g | Drawing-PDF |
| 110.082.000 | EK 082 | 129 | 84 | 67 | 113 | 52 | 514g | Drawing-PDF |
| 111.083.000 | EKF 083 | 179 | 84 | 44 | 163 | 52 | 538g | Drawing-PDF |
| 110.083.000 | EK 083 | 179 | 84 | 67 | 163 | 52 | 666g | Drawing-PDF |
| 111.121.000 | EKF 121 | 127.5 | 125.5 | 60 | 106 | 82 | 880g | Drawing-PDF |
| 110.121.000 | EK 121 | 127.5 | 125.5 | 90 | 106 | 82 | 1,050g | Drawing-PDF |
| 111.123.000 | EKF 123 | 225.5 | 125.5 | 60 | 204 | 82 | 1,150g | Drawing-PDF |
| 110.123.000 | EK 123 | 225.5 | 125.5 | 90 | 204 | 82 | 1,386g | Drawing-PDF |
| 111.161.000 | EKF 161 | 166 | 166 | 60 | 140 | 110 | 1,320g | Drawing-PDF |
| 110.161.000 | EK 161 | 166 | 166 | 100 | 140 | 110 | 1,550g | Drawing-PDF |
| 111.162.000 | EKF 162 | 266 | 166 | 60 | 240 | 110 | 1,880g | Drawing-PDF |
| 110.162.000 | EK 162 | 266 | 166 | 100 | 240 | 110 | 2,128g | Drawing-PDF |
| TECHNICAL DATA & OPTIONS | ||
| Enclosure |  |
Die-cast aluminium G AL Si12 / DIN 1725 |
| Lid screws |  |
Stainless steel captive screws |
| Enclosure temperature range |  |
As per gasket type fitted. |
| Ingress Protection |  |
IP 66 / DIN 40050 (On request IP 67) |
| IP 66 Gasket (Standard) |
 |
Forprene gasket (siliconfree) fitted into the enclosure lid. (-40ºC to +150ºC). |
| High Temperature Gasket (On request) |
 |
Option 'D' Oil & petrol resistant silicon gasket fitted into the enclosure lid. (-50ºC to +140ºC). |
| IP 67 (On request) |
 |
Option 'PLUS' Enclosure formatted for a higher degree of protection to IP 67 |
| Standard EMC |
 |
EMC as standard. Special ribs, in the rim of the base, are compressed by the lid make good EMC contact throughout. |
| Internal mounting |  |
Blind hole internal mounting points in the lid and the base for mounting your assemblies. |
|
Condensation Glands - IP 67 (on request) |
 |
Gortex condensation glands can be fitted to the cases on request. These are especially useful when there is a large variance in the operating temperature over a short period, which can result in condensation on the inside of the enclosure. These glands ventilate the case while maintaining IP67 protection. |
| Finish / colour |  |
Standard - Powder coated silky grey RAL7032 Optional colour - Silver grey RAL 7001 (without extra cost) Option 'K' - Chromatizing before painting* Option 'L' - Corrosion proof coating RAL 5009* Other options- stove-finished structured paint, special colours * * - at extra cost. |
| Modifications |  |
We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation. More about customising... |
| Request a catalogue | return to enclosures index | Request a sample |
| Home | About Us | Enclosures | Technical | Service Desk | News | Contact | ||
| CALL (01489) 583858 | ||||||||
| Legal notice: copyright © 2000-2005 OKW Enclosures Ltd, UK. All rights reserved. Rev:2005.09.27 Rolec ® is the registered trademark of Rolec Gehäuse-Systeme GmbH, Germany. |
||||||||
