Home About Us Enclosures Technical Service Desk News Contact  

conTROL

conFORM Enclosures

1.
2.
3.
4.
5.
6.
7.
Robust and attractive controller enclosures
Recessed lid provides protection for control buttons
Excellent EMC performance
Small ribs in the base are compressed by the lid, thus providing the EMC contact
Very competetive pricing as expensive EMC gaskets are not required
Four standard sizes and optional accessories
Ingress protection to IP 66 or, on request, IP 67 with special gasket

conTROL

Part No.
(click for price!)		 Type Length Width Height D E Weight Drawing
PDF format
311.082.000 EKTF 082 129.8 84.8 55 113 52 450g Drawing-PDF
310.082.000 EKT 082 129.8 84.8 78 113 52 600g Drawing-PDF
311.083.000 EKTF 083 179.8 84.8 55 163 52 600g Drawing-PDF
310.083.000 EKT 083 179.8 84.8 78 163 52 750g Drawing-PDF


conTROL ACCESSORIES
 
For Type.. Internal Mounting
Plate 		External Mounting Brackets External
Hinges		 Internal
Hinges
Panel
Mounting
kit		 Terminal Mounting
Rail
EKTF
082		 507.082.100 501.000.010 510.000.022 - 517.000.000 509.082.100
EKT
082		 507.082.100 501.000.010 510.000.022 515.000.000 517.000.000 509.082.100
EKTF
083		 507.083.100 501.000.010 510.000.022 - 517.000.000 509.083.100
EKF
083		 507.083.100 501.000.010 510.000.022 515.000.000 517.000.000 509.083.100

ORDER EXAMPLE: Case EKT 082 with mounting plate and external hinges
Order Case Part No. 310.082.000 + Mounting Plate Part No. 507.082.100 + External Hinges Part No. 510.000.022
We will then supply the case pre-drilled for mounting the hinges along with the mounting plate and two hinge assemblies.


TECHNICAL DATA & OPTIONS
Enclosure Die-cast aluminium G AL Si12 / DIN 1725
Lid screws Stainless steel captive screws
Enclosure temperature range As per gasket type fitted.
Ingress Protection IP 66 / DIN 40050 (On request IP 67)
IP 66 Gasket
(Standard)		 Forprene gasket (siliconfree) fitted into the enclosure lid.
(-40ºC to +150ºC).
High Temperature Gasket
(On request)		 Option 'D'
Oil & petrol resistant silicon gasket fitted into the enclosure lid.
(-50ºC to +140ºC).
IP 67
(On request)		 Option 'PLUS'
Enclosure formatted for a higher degree of protection to IP 67
Standard EMC
 EMC as standard. Special ribs, in the rim of the base, are compressed by the lid make good EMC contact throughout.
Internal mounting Blind hole internal mounting points in the lid and the base for mounting your assemblies.
Condensation Glands - IP 67
(on request) 		Gortex condensation glands can be fitted to the cases on request. These are especially useful when there is a large variance in the operating temperature over a short period, which can result in condensation on the inside of the enclosure. These glands ventilate the case while maintaining IP67 protection.
Finish / colour Standard - Powder coated silky grey RAL7032
Optional colour - Silver grey RAL 7001 (without extra cost)
Option 'K' - Chromatizing before painting*
Option 'L' - Corrosion proof coating RAL 5009*
Other options- stove-finished structured paint, special colours *
* - at extra cost.
Modifications We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation.
More about customising...

Request a catalogue return to enclosures index Request a sample

  Home About Us Enclosures Technical Service Desk News Contact  
CALL (01489) 583858
Legal notice: copyright © 2000-2004 OKW Enclosures Ltd, UK. All rights reserved. Rev:2004.01.02
Rolec ® is the registered trademark of Rolec Gehäuse-Systeme GmbH, Germany.