Rolec Electronic and Electrical Enclosures

Home About Us Enclosures Technical Service Desk News Contact

mobilCASE

mobilCASE

THE NEW HAND-HELD ENCLOSURES CONCEPT!

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Aluminium hand-held enclosures for indoor and outdoor applications

Cases can be sealed up to IP 65 (Desk version IP 54)

Cases are configured by ordering separate kits

Closed version, with box section case extrusion for slide-in PCBs

Two-part version, with separate case profiles for easy mounting of short-stroke keyboards

Large range of sizes with three profile widths and various depths

Die-cast lids are ordered separately to close the ends of the case extrusions

Two lid types: flat lid or deep lid (with access for batteries or mounting for a cable gland)

Desk versions can be configured using the hinged adaptor

Easy mounting of membrane keypads and product labels on the top and base

Optional carrying strap with protective end caps

mobilCASE ASSEMBLY

1. Case Extrusion

2. 8mm Lid

3. 16mm Lid

4. Case Sealing Gaskets

5. Screw Plug

6. Lid Fixing Screw

7. Rubber Cap

mobilCASE - CASE EXTRUSIONS

Part No.
Closed Box Section
Case Extrusion
(click for price!) Part No.
Open Two Part
Case Extrusion Kit
(click for price!) Type W L P H (Int.) Drawings
PDF or DWG
Formats

250.080.120 P 80-1-120 118 120 80 27 PDF   DWG

251.080.120 P 80-2-120 118 120 80 27 PDF   DWG

250.080.160 P 80-1-160 118 160 80 27 PDF   DWG

251.080.160 P 80-2-160 118 160 80 27 PDF   DWG

250.100.160 P 100-1-160 138 160 100 27 PDF   DWG

251.100.160 P 100-2-160 138 160 100 27 PDF   DWG

250.100.200 P 100-1-200 138 200 100 27 PDF   DWG

251.100.200 P 100-2-200 138 200 100 27 PDF   DWG

250.130.180 P 130-1-180 168 180 130 27 PDF   DWG

251.130.180 P 130-1-180 168 180 130 27 PDF   DWG

250.130.240 P 130-1-240 168 240 130 27 PDF   DWG

251.130.240 P 130-1-240 168 240 130 27 PDF   DWG

mobilCASE - LID KITS

Lid Kit DK - The 16mm lid is supplied with a screw plug for battery access.
Alternatively an M16 Cable Gland/Adaptor Kit (585.000.000) can be fitted to this lid, as shown, and the screw plug is simply discarded.
Part No.
Lid Kit DF
2 8mm Lids, 2 Gaskets,
6 Screws &
6 Rubber Plugs
(click for price!) Part No.
Lid Kit DK
8mm Lid, 16mm Lid,
Screw Plug, 2 Gaskets,
6 Screws, 6 Rubber Plugs
(click for price!) Part No.
Hinged Adaptor PG
For Desk Versions
(click for price!) For case extrusion size..

580.080.000 581.080.000 Width 118 - Closed Extrusion

586.080.000 587.080.000 Width 118 - Two part Extrusion

580.100.000 581.100.000 Width 138 - Closed Extrusion

586.100.000 587.100.000 Width 138 - Two part Extrusion

580.130.000 581.130.000 Width 168 - Closed Extrusion

586.130.000 587.130.000 Width 168 - Two part Extrusion

582.080.080 Width 80 + Width 80

582.080.100 Width 80 + Width 100

582.080.130 Width 80 + Width 130

582.100.100 Width 100 + Width 100

582.100.130 Width 100 + Width 130

582.130.130 Width 130 + Width 130

mobilCASE - ACCESSORIES

Part No.
Shoulder Strap +
2 Protective End Caps
(click for price!) Part No.
AA Battery
Holders
(click for price!) Part No.
M16 Cable Gland
with Adaptor Plug
(click for price!) Description

583.080.000 For case size P = 80mm

583.100.000 For case size P = 100mm

583.130.000 For case size P = 130mm

584.002.000 Battery Holder for 2 x 1.5V AA cells

584.004.000 Battery Holder for 4 x 1.5V AA cells

585.000.000 For cases fitted with lid kit DK

TECHNICAL DATA & OPTIONS

Case Extrusions Extruded aluminium:
Al MG Si 0.5 / DIN 17615

Case Lids Die-cast Zinc Alloy
GD-Zn AL 4 CU 1 / DIN EN 12844

Extrusion Gaskets (two part only) Neoprene circular section cord
Temp range -30ºC to 100ºC

Case Lids Gaskets Thermoplastic shaped gasket
Black TPE / Temp range -30ºC to 100ºC

Lid Fixing Screws Stainless steel
V2A / DIN 7981

Ingress Protection IP 65 / DIN EN 60529
(Desk Version IP 54)

Enclosure temperature range As per gaskets.

Modifications We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation.
More about customising...

Request a catalogue return to enclosures index Request a sample

Home About Us Enclosures Technical Service Desk News Contact

CALL (01489) 583858

Legal notice: copyright © 2000-2005 OKW Enclosures Ltd, UK. All rights reserved. Rev:2005.01.04
Rolec ® is the registered trademark of Rolec Gehäuse-Systeme GmbH, Germany.


	Home	About Us	Enclosures	Technical	Service Desk	News	Contact

mobilCASE ASSEMBLY
	1. Case Extrusion 2. 8mm Lid 3. 16mm Lid 4. Case Sealing Gaskets 5. Screw Plug 6. Lid Fixing Screw 7. Rubber Cap

mobilCASE - CASE EXTRUSIONS

Part No. Closed Box Section Case Extrusion (click for price!)	Part No. Open Two Part Case Extrusion Kit (click for price!)	Type	W	L	P	H (Int.)	Drawings PDF or DWG Formats
250.080.120		P 80-1-120	118	120	80	27	PDF DWG
	251.080.120	P 80-2-120	118	120	80	27	PDF DWG
250.080.160		P 80-1-160	118	160	80	27	PDF DWG
	251.080.160	P 80-2-160	118	160	80	27	PDF DWG
250.100.160		P 100-1-160	138	160	100	27	PDF DWG
	251.100.160	P 100-2-160	138	160	100	27	PDF DWG
250.100.200		P 100-1-200	138	200	100	27	PDF DWG
	251.100.200	P 100-2-200	138	200	100	27	PDF DWG
250.130.180		P 130-1-180	168	180	130	27	PDF DWG
	251.130.180	P 130-1-180	168	180	130	27	PDF DWG
250.130.240		P 130-1-240	168	240	130	27	PDF DWG
	251.130.240	P 130-1-240	168	240	130	27	PDF DWG

mobilCASE - LID KITS
			Lid Kit DK - The 16mm lid is supplied with a screw plug for battery access. Alternatively an M16 Cable Gland/Adaptor Kit (585.000.000) can be fitted to this lid, as shown, and the screw plug is simply discarded.
Part No. Lid Kit DF 2 8mm Lids, 2 Gaskets, 6 Screws & 6 Rubber Plugs (click for price!)	Part No. Lid Kit DK 8mm Lid, 16mm Lid, Screw Plug, 2 Gaskets, 6 Screws, 6 Rubber Plugs (click for price!)	Part No. Hinged Adaptor PG For Desk Versions (click for price!)	For case extrusion size..
580.080.000	581.080.000		Width 118 - Closed Extrusion
586.080.000	587.080.000		Width 118 - Two part Extrusion
580.100.000	581.100.000		Width 138 - Closed Extrusion
586.100.000	587.100.000		Width 138 - Two part Extrusion
580.130.000	581.130.000		Width 168 - Closed Extrusion
586.130.000	587.130.000		Width 168 - Two part Extrusion
		582.080.080	Width 80 + Width 80
		582.080.100	Width 80 + Width 100
		582.080.130	Width 80 + Width 130
		582.100.100	Width 100 + Width 100
		582.100.130	Width 100 + Width 130
		582.130.130	Width 130 + Width 130

mobilCASE - ACCESSORIES

Part No. Shoulder Strap + 2 Protective End Caps (click for price!)	Part No. AA Battery Holders (click for price!)	Part No. M16 Cable Gland with Adaptor Plug (click for price!)	Description
583.080.000			For case size P = 80mm
583.100.000			For case size P = 100mm
583.130.000			For case size P = 130mm
	584.002.000		Battery Holder for 2 x 1.5V AA cells
	584.004.000		Battery Holder for 4 x 1.5V AA cells
		585.000.000	For cases fitted with lid kit DK

TECHNICAL DATA & OPTIONS
Case Extrusions		Extruded aluminium: Al MG Si 0.5 / DIN 17615
Case Lids		Die-cast Zinc Alloy GD-Zn AL 4 CU 1 / DIN EN 12844
Extrusion Gaskets (two part only)		Neoprene circular section cord Temp range -30ºC to 100ºC
Case Lids Gaskets		Thermoplastic shaped gasket Black TPE / Temp range -30ºC to 100ºC
Lid Fixing Screws		Stainless steel V2A / DIN 7981
Ingress Protection		IP 65 / DIN EN 60529 (Desk Version IP 54)
Enclosure temperature range		As per gaskets.
Modifications		We can supply the enclosures ready for your assemblies by drilling, milling, engraving, painting, silk-screen printing, adding inserts and much more. Just ask us for a quotation. More about customising...