| |
For over thirty years Rolec have developed highly innovative enclosures for industrial electronics and
electrical equipment.
Here you can read about our latest developments.
|
| |
| |
|
|
February 2010 |
|
|
Installing electronics or electrical equipment is now faster and easier with ROLEC’s
latest new additions to its ‘ aluCASE’ aluminium enclosure range.
|
|
|
| |
|
| |
|
|
September 2009 |
|
ROLEC have extended their range of handCASE enclosures with four new Type R
models. These high performance IP 66 aluminium enclosures have been designed for
mobile handheld electronics which are used in harsh indoor or outdoor environments. |
|
| |
|
| |
|
|
August 2009 |
|
Design engineers are frequently asked to develop electronics equipment that can be
installed, or replaced, in an instant. To meet this need, the new aluCLIC enclosures feature a snap-on mounting device that replaces the traditional wall mounting screws. |
|
| |
|
| |
|
|
June 2009 |
|
ROLEC have added ten new smaller sizes to their existing range of aluCASE
diecast enclosures. These modern IP 67 enclosures have many intelligent features
to make installation of the electronics and electrical equipment very easy. |
|
| |
|
| |
|
|
January 2009 |
|
ROLEC have published their new comprehensive catalogue detailing their huge range
of electronic enclosures and electrical enclosures for industrial applications. For the
first time all the product sections have been combined into one easy to use handbook.
|
|
| |
|
| |
|
|
November 2008 |
|
The conFORM shielded enclosures, from ROLEC, are specially designed to protect
highly sensitive electronic components against radio frequency interference. The
enclosures have been EMC performance tested by Hanover University in Germany.
|
|
| |
|
| |
|
|
October 2008 |
|
ROLEC has introduced its polyKOM series of polyester enclosures. These universal enclosures are suitable for housing a very wide range of electrical equipment, especially for outdoor use.
|
|
| |
|
|
|
|
September 2008 |
|
ROLEC has extended its aluKOM series of diecast aluminium enclosures. These versatile, tough and economic enclosures are suitable for housing a very wide range of electrical equipment. |
|
| |
|
|
|
|
August 2008 |
|
ROLEC has extended its aluFACE series of aluminium enclosures, which have been designed for housing electrical control equipment. Typical applications will include machine and process control equipment, measurement and testing equipment etc. |
|
| |
|
|
|
|
June 2008 |
|
The versatile aluNORM diecast aluminium enclosures are suitable for electrical and electronic equipment. Typical applications will include machine and process control systems, terminal boxes, test equipment and measurement systems etc. |
|
| |
|
|
|
|
May 2008 |
|
ROLEC’s versatile aluNORM diecast aluminium enclosures are suitable for electrical and electronic equipment. Typical applications will include machine and process control systems, terminal boxes, test equipment and measurement systems etc. |
|
| |
|
|
|
|
April 2008 |
|
The diecast aluminium conFORM and conTROL enclosures have been specially designed to protect electronic and electrical systems against RFI/EMI interference, or
and
to aid designers meet the EMC regulations. |
|
| |
|
|
|
|
March 2008 |
|
ROLEC have announced the polyDOOR enclosures. These tough housings are based on the popular polyTOP range, but with the addition of a robust hinged door, with or without a transparent window, which makes them ideal for wall mounted equipment. |
|
| |
|
|
|
|
February 2008 |
|
ROLEC have launched the new mobilCASE range. These unique handheld enclosures are designed for housing mobile electronics equipment for data-collection, machine control, robotics, medical applications etc. |
|
| |
|
|
|
|
January 2008 |
|
The technoBOX ABS enclosures are designed for electronics and electrical equipment. The range features an attractive modern design including a bevelled lid, clean lines and easy assembly, all at very competitive prices. |
|
| |
|
|
|
|
December 2007 |
|
The diecast aluminium aluCASE range has been extended with new models which have hinged lids. Typical applications will include electronics and electrical control equipment which require access for calibration, data acquisition or servicing. |
|
| |
|
|
|
|
November 2007 |
|
The robust and versatile conTROL enclosures are suitable for housing many different types of electrical and electronic devices. These new enclosures have a recessed lid which provides protection for the controls. |
|
| |
|
|
|
|
October 2007 |
|
The aluTWIN IP66 dual section enclosures are suitable for all types of industrial applications, especially for housing wall and machine mounted electronics and electrical equipment. |
|
| |
|
|
|
|
September 2007 |
|
The IP54 topVISION command and controller enclosures have been designed for housing large machine control systems mounted on suspension arm systems. The
range is available in ten standard models. |
|
| |
|
|
|
|
August 2007 |
|
The polyTOP range of polyester enclosures can be specified with optional lid fixings including tamper-proof screws for applications such as security and safety systems, factory equipment and terminal boxes. |
|
| |
|
|
|
|
May 2007 |
|
ROLEC have launched their new staKOM range of IP54 command enclosures which have been designed for housing control systems for individual machines or process controllers machine mounted or fitted to suspension arms. |
|
| |
|
|
|
|
April 2007 |
|
The universal aluKOM series of diecast aluminium enclosures is suitable for housing a very wide range of electronics and electrical equipment. The enclosures
are designed for easy customisation.
|
|
| |
|
|
|
|
March 2007 |
|
ROLEC have launched their aluKOM-Ex hazardous area enclosures, which are manufactured in accordance with KEMA 02ATEX2054 /2054U, EN 50014/19/20, EN 50281-1-1 and CE0344. |
|
| |
|
|
|
|
February 2007 |
|
ROLEC manufacture a large range of heavy duty enclosures in diecast aluminium and glass reinforced polyester. Typical applications include machine controllers, terminals, measurement and monitoring technology and equipment in explosive areas. |
|
| |
|
|
|
|
November 2006 |
|
ROLEC manufactures a large range of IP66 enclosures in diecast and extruded aluminium and steel. The aluFACE and topVISION enclosures are available with
hinged front and rear sections which give improved access. |
|
| |
|
|
|
|
October 2006 |
|
ROLEC has extended its popular aluCASE range of IP67 diecast enclosures
New sizes added to the range include 150x180x60 & 90mm, 150x260x60 & 90mm, 170x200x60mm and 170x280x60 & 90mm.
|
|
| |
|
|
|
|
September 2006 |
|
ROLEC has introduced its range of dual section IP66 aluminium enclosures. Dual section enclosures allow the installation of PCBs, LCDs, power supplies and other active components in a separate compartment from the terminal connections. |
|
| |
|
|
|
|
August 2006 |
|
ROLEC is proud to announce that it has received ATEX certification for its comprehensive programme of aluminium and glass filled polyester Ex enclosures:
aluKOM-Ex, polyTOP-Ex, and polyKOM-Ex lines. |
|
| |
|
|
|
|
May 2006 |
|
ROLEC has introduced its fully insulated weatherproof and chemical
resistant polyKOM enclosures which feature an ingress protection class
of IP66 and are suitable for a wide variety of industrial applications. |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
