ROLEC United Kingdom
Tel: (01489) 583858
commandCASE_TitleImageWide
You are here: | |

commandCASE

  • Video
  • Photo Gallery



commandCASE is an elegant and economic range of diecast command and control enclosures. The highly attractive design perfectly matches our profiPLUS suspension arm system, or other modern arms systems. All models feature ergonomic handles on the front for easy positioning when suspended.  

The range is available in three versions: with hinges and quick-action closure (also lockable), with hinges and screw fixing or as a fully screw fixed version. Lid supports provide strain-relief. The front is recessed to accommodate a membrane keypad, front plate or display panel. At the rear the screw channels are fitted with cover caps which also serve as edge protection. Threaded screw bosses are provided inside for mounting assemblies and components. Mounting plates, matching cable glands and other accessories are also available.

We can supply commandCASE enclosures fully customised to your requirements.

Enclosure sizes 6 sizes in 3 variants
Dimensions of L x W x H 
230 x 200 x 120mm to 430 x 300 x 120mm
Additional info Designer handles
Integrated recess in the lid for membrane keypad or front plates
End caps made from polyoxymethylene (POM), RAL 7016 anthracite grey
Integrated lid support, PP (polypropylene), RAL 7040 window grey
Optional: Quick-acting closure and hinge, narrow side (side W)
Enclosure Die-cast aluminium alloy
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
Fastening On a ROLEC suspension arm system or directly attached to the wall in the version with lock and hinge - with or without designer handles
Internal mounting M5 fastening thread on the enclosure base and in the lid
Ingress protection IP 66 / EN 60529
Gasket Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
Optional: Silicone O-ring gasket, temperature resistance: -50°C to +140°C
Surface Powder coating RAL 7035, light grey
Optional: Special colours
Optional: Corrosion protection
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to commandCASE

commandCASE - Products

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
Silicon-gasket
Shielding
Corrosion proof coating
Hinges
Snap closure
Closure with lock
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
193.200.000 CC 200 193.200.000 230 200 120 2466 212 144 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
193.202.000 CC 202 193.202.000 330 200 120 3038 312 144 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
193.250.000 CC 250 193.250.000 280 250 120 3145 262 194 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
193.252.000 CC 252 193.252.000 380 250 120 3804 362 194 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
193.300.000 CC 300 193.300.000 330 300 120 4134 312 244 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
193.302.000 CC 302 193.302.000 430 300 120 4872 412 244 Silicon-gasket Shielding Corrosion proof coating Hinges Snap closure Closure with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


Variante 1

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
Silicon-gasket
Shielding
Corrosion proof coating
Hinges
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
194.200.000 CCS 200 194.200.000 230 200 120 2466 212 144 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
194.202.000 CCS 202 194.202.000 330 200 120 3038 312 144 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
194.250.000 CCS 250 194.250.000 280 250 120 3145 262 194 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
194.252.000 CCS 252 194.252.000 380 250 120 3804 362 194 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
194.300.000 CCS 300 194.300.000 330 300 120 4134 312 244 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
194.302.000 CCS 302 194.302.000 430 300 120 4872 412 244 Silicon-gasket Shielding Corrosion proof coating Hinges PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


Variante 2

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
Silicon-gasket
Shielding
Integrated lid supports
Corrosion proof coating
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
195.200.000 CCV 200 195.200.000 230 200 120 2466 212 144 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
195.202.000 CCV 202 195.202.000 330 200 120 3038 312 144 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
195.250.000 CCV 250 195.250.000 280 250 120 3145 262 194 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
195.252.000 CCV 252 195.252.000 380 250 120 3804 362 194 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
195.300.000 CCV 300 195.300.000 330 300 120 4134 312 244 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
195.302.000 CCV 302 195.302.000 430 300 120 4872 412 244 Silicon-gasket Shielding Integrated lid supports Corrosion proof coating PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available