ROLEC United Kingdom
Tel: (01489) 583858
profiPANEL-
You are here: | |

profiPANEL

  • Photo Gallery
The wall pivot mount
The wall pivot mount
Desk connection
Installation-ready processing is one of our particular strengths

Up to IP 65

Thanks to the option of combining the three basic profile depths, profiPANEL enables a total of eight mounting depths to be provided for (PPD 150 is available, as required, as a basic profile or as a profile combination consisting of a 90 mm and a 60 mm basic profile). The connection of 60 or 90 mm deep desk also offers additional options for extended internal mounting. Thanks to this wide range of depths, profiPANEL therefore enables almost every conceivable configuration for the internal mounting of components to be realised. The enclosure front of the profiPANEL system is manufactured made-to-measure and provides for the almost edgeless and flush mounting of a front plate, which is permanently connected to the enclosure. Appropriate cut-outs for a display, switches and more are included in the service provided by ROLEC and are produced ex-works to meet customer specifications. A desk is a clever solution when there’s not enough space in the control enclosure or you need additional buttons. The profiPANEL series therefore includes two desk models, 60 and 90 mm deep (D), for internal mounting. The desk adapter offers plenty of space for routing HDMI or DVI cables or network plugs. The desk is 200 mm high ex works. Non-standard dimensions are available on request. The rear wall of the desk is bolted on as standard. An ergonomically designed profile handle system is available for even more convenient handling, particularly with the deeper profile versions. There is also a 450-mm wide latching keyboard holder as an alternative to the desk, which can be enhanced and/or extended by an additional mouse holder.

Enclosure sizes Made-to-measure as per customer's needs
L x W x H max. 150 x 150 x 360 mm
800 x 800 x 60-300 mm
Additional information Minimalist, multi-variable design for modern machines
Profile enclosure – made-to-measure
Three basic profiles (60/90/150 mm). Eight  enclosure depths: 60/90/120/150/180/210/240/300 mm
Front plate is permanently connected to the enclosure, mounted almost edgeless and flush
Enclosure Extruded aluminium
PA corner covers, RAL 7035
Standard front plates: aluminium 3 mm, Al Mg 1, silver anodised
Finished front plates, bored, stamped, engraved or printed
Optional: Profile handle, PA, RAL 7035, extruded aluminium
Enclosure lock Basic profiles: locks and exterior hinges, optionally bolted
Enclosure lock profile combinations: locks and exterior hinges
Fastening Basic profile with panel coupling, all other profiles with coupling on the ROLEC suspension arm system profiPLUS 50
Internal mounting Slide-in contour for spring nuts M4/M5
Ingress protection Up to IP 65 / EN 60529
Coating Anodised
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Configuration Use our handy enquiry form to configure your individual control enclosure

Dimensions

 
Type
Part No.
Handle system
Hinges
Double-bit fastener
WA
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
Add to my list
330.060.AAA PPD 60 Basis 330.060.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
330.090.AAA PPD 90 Basis 330.090.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
330.150.AAA PPD 150 Basis 330.150.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.120.AAA PPD 120 (Kombi 60/60) 332.120.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.180.AAA PPD 150 (Kombi 90/60) 332.150.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.150.AAA PPD 180 (Kombi 90/90) 332.180.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.210.AAA PPD 210 (Kombi 150/60) 332.210.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.240.AAA PPD 240 (Kombi 150/90) 332.240.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
332.300.AAA PPD 300 (Kombi 150/150) 332.300.AAA Handle system Hinges Double-bit fastener WA PDF AutoCAD AutoCAD Add to my list
standard standard   available available   not available  not available