ROLEC United Kingdom
Tel: (01489) 583858
Tel: (01489) 583858
You are here:
Products
Enclosures & Accessories
IP66 Enclosures
aluNORM
standard
available
not available
standard
available
not available
standard
available
not available
standard
available
not available
Enclosures & Accessories
IP66 Enclosures
aluNORM
aluNORM
- Video
- Photo Gallery
aluNORM IP 66 diecast aluminium enclosures are designed to protect electrical and electronic components. The enclosures are available in four different versions with different lid and base combinations. This gives a huge variety of sizes and design options to choose from.
Uniquely, aluNORM enclosures are mounted to a wall or machine using the same screw channels as the lid fixings. This means there is more space inside for your assemblies and components. EMC shielded versions are available for the AS and AD variants, and some AF and AH variants - see ordering details. Threaded screw bosses in the lid and base enable fast installation of terminal rails, mounting plates etc. Matching cable glands and accessories are also available.
We can supply aluNORM enclosures fully customised to your requirements.
| Enclosure sizes | 86 sizes |
| Dimensions from: L x W x H | |
| 50 x 65 x 40 mm to 640 x 320 x 120 mm | |
| Additional info | 4 different variants |
| AS (deep bottom, flat lid) AD (flat bottom, deep lid) AF (flat bottom, flat lid) AH (deep bottom, deep lid) | |
| Compatible assembly dimensions with the polyTOP range (polyester enclosure) | |
| Optional: Specially developed external mounting brackets made from die-cast aluminium, available from AS 080 | |
| Enclosure | Diecast aluminium |
| EN AC 44300/EN AC-44200 (DIN EN 1706) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Space-saving single-channel technology for lid and fastening screws outside of the enclosure interior Even square enclosures can be screwed into any position without problems, thanks to the symmetrical arrangement |
| Internal mounting | Fastening thread in lateral bars on the floor of the enclosure and a fastening option and/or thread in the lid (both depending on the variant) |
| Mounting plate made from galvanised sheet steel available as an accessory | |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 / EN 60529 | |
| Gasket | Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C |
| or TPE moulded gasket, silicone-free, temperature resistance: -40°C to +120°C | |
| Optional: Silicone gasket, temperature resistance:-50°C to +140°C | |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating RAL 7032, silky grey |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |
AF Dimensions
Type |
Part No. |
Length |
Width |
Height |
Weight (g) |
Mounting point D |
Mounting point E |
External mounting brackets |
Block terminal support |
Silicon-gasket |
Shielding |
Hold hinges |
Corrosion proof coating |
Mounting plates |
Protection Class IP 67 |
Cross rail |
Hinges |
Supporting rail for series terminals |
Designed gasket |
PDF-Drawing |
AutoCAD DXF-Format |
AutoCAD DWG Format |
3D-Model-Download |
Add to my list |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AF 080 | 102.080.000 | 80 | 80 | 40 | 240 | 67 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
AF 082 | 102.082.000 | 120 | 80 | 40 | 330 | 107 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 084 | 102.084.000 | 160 | 80 | 40 | 400 | 147 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 100 | 102.100.000 | 100 | 100 | 54 | 420 | 87 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 102 | 102.102.000 | 150 | 100 | 54 | 540 | 137 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 104 | 102.104.000 | 200 | 100 | 54 | 690 | 187 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 120 | 102.120.000 | 120 | 120 | 66 | 780 | 102 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 122 | 102.122.000 | 180 | 120 | 66 | 1010 | 162 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 124 | 102.124.000 | 240 | 120 | 66 | 1260 | 222 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 160 | 102.160.000 | 160 | 160 | 66 | 1130 | 142 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 162 | 102.162.000 | 240 | 160 | 66 | 1560 | 222 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 164 | 102.164.000 | 320 | 160 | 66 | 1910 | 302 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 166 | 102.166.000 | 480 | 160 | 66 | 3030 | 462 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 200 | 102.200.000 | 200 | 200 | 80 | 1780 | 180 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 202 | 102.202.000 | 300 | 200 | 80 | 2380 | 280 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 204 | 102.204.000 | 400 | 200 | 80 | 3560 | 380 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 240 | 102.240.000 | 240 | 240 | 80 | 2380 | 220 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 242 | 102.242.000 | 360 | 240 | 80 | 3630 | 340 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 244 | 102.244.000 | 480 | 240 | 80 | 4690 | 460 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 320 | 102.320.000 | 320 | 320 | 80 | 4000 | 300 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 322 | 102.322.000 | 480 | 320 | 80 | 5650 | 460 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AF 324 | 102.324.000 | 640 | 320 | 80 | 7350 | 620 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
standard
available
not available
AS Dimensions
Type |
Part No. |
Length |
Width |
Height |
Weight (g) |
Mounting point D |
Mounting point E |
External mounting brackets |
Block terminal support |
Silicon-gasket |
Shielding |
Hold hinges |
Internal hinges |
Corrosion proof coating |
Mounting plates |
Protection Class IP 67 |
Hinges |
Supporting rail for series terminals |
Designed gasket |
PDF-Drawing |
AutoCAD DXF-Format |
AutoCAD DWG Format |
3D-Model-Download |
Add to my list |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AS 060 | 100.060.000 | 50 | 65 | 40 | 130 | 38 | 53 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 062 | 100.062.000 | 65 | 65 | 40 | 170 | 53 | 53 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 064 | 100.064.000 | 100 | 65 | 40 | 220 | 88 | 53 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 066 | 100.066.000 | 150 | 65 | 40 | 310 | 138 | 53 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 080 | 100.080.000 | 80 | 80 | 60 | 320 | 67 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 082 | 100.082.000 | 120 | 80 | 60 | 460 | 107 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 084 | 100.084.000 | 160 | 80 | 60 | 610 | 147 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 100 | 100.100.000 | 100 | 100 | 80 | 550 | 87 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 102 | 100.102.000 | 150 | 100 | 80 | 730 | 137 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 104 | 100.104.000 | 200 | 100 | 80 | 910 | 187 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 120 | 100.120.000 | 120 | 120 | 100 | 1070 | 102 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 122 | 100.122.000 | 180 | 120 | 100 | 1310 | 162 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 124 | 100.124.000 | 240 | 120 | 100 | 1680 | 222 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 160 | 100.160.000 | 160 | 160 | 100 | 1520 | 142 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 162 | 100.162.000 | 240 | 160 | 100 | 1980 | 222 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 164 | 100.164.000 | 320 | 160 | 100 | 2480 | 302 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 166 | 100.166.000 | 480 | 160 | 100 | 3900 | 462 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 200 | 100.200.000 | 200 | 200 | 120 | 2480 | 180 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 202 | 100.202.000 | 300 | 200 | 120 | 3250 | 280 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 204 | 100.204.000 | 400 | 200 | 120 | 4700 | 380 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 240 | 100.240.000 | 240 | 240 | 120 | 3400 | 220 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 242 | 100.242.000 | 360 | 240 | 120 | 4000 | 340 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 244 | 100.244.000 | 480 | 240 | 120 | 6100 | 460 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 320 | 100.320.000 | 320 | 320 | 120 | 4900 | 300 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 322 | 100.322.000 | 480 | 320 | 120 | 6600 | 460 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AS 324 | 100.324.000 | 640 | 320 | 120 | 8700 | 620 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
standard
available
not available
AH Dimensions
Type |
Part No. |
Length |
Width |
Height |
Weight (g) |
Mounting point D |
Mounting point E |
External mounting brackets |
Silicon-gasket |
Shielding |
Hold hinges |
Corrosion proof coating |
Mounting plates |
Protection Class IP 67 |
Hinges |
Designed gasket |
PDF-Drawing |
AutoCAD DXF-Format |
AutoCAD DWG Format |
3D-Model-Download |
Add to my list |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AH 100 | 103.100.000 | 100 | 100 | 106 | 630 | 87 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 102 | 103.102.000 | 150 | 100 | 106 | 760 | 137 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 104 | 103.104.000 | 200 | 100 | 106 | 940 | 187 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 120 | 103.120.000 | 120 | 120 | 134 | 1280 | 102 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 122 | 103.122.000 | 180 | 120 | 134 | 1560 | 162 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 124 | 103.124.000 | 240 | 120 | 134 | 2000 | 222 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 160 | 103.160.000 | 160 | 160 | 134 | 1810 | 142 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 162 | 103.162.000 | 240 | 160 | 134 | 2300 | 222 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 164 | 103.164.000 | 320 | 160 | 134 | 2950 | 302 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 166 | 103.166.000 | 480 | 160 | 134 | 4640 | 462 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 200 | 103.200.000 | 200 | 200 | 159 | 2950 | 180 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 202 | 103.202.000 | 300 | 200 | 159 | 3880 | 280 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 204 | 103.204.000 | 400 | 200 | 159 | 5600 | 380 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 240 | 103.240.000 | 240 | 240 | 159 | 4050 | 220 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 242 | 103.242.000 | 360 | 240 | 159 | 4760 | 340 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AH 244 | 103.244.000 | 480 | 240 | 159 | 7260 | 460 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
standard
available
not available
AD Dimensions
Type |
Part No. |
Length |
Width |
Height |
Weight (g) |
Mounting point D |
Mounting point E |
External mounting brackets |
Block terminal support |
Silicon-gasket |
Shielding |
Hold hinges |
Internal hinges |
Corrosion proof coating |
Mounting plates |
Protection Class IP 67 |
Cross rail |
Hinges |
Supporting rail for series terminals |
Designed gasket |
PDF-Drawing |
AutoCAD DXF-Format |
AutoCAD DWG Format |
3D-Model-Download |
Add to my list |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD 080 | 101.080.000 | 80 | 80 | 60 | 320 | 67 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 082 | 101.082.000 | 120 | 80 | 60 | 460 | 107 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 084 | 101.084.000 | 160 | 80 | 60 | 610 | 147 | 67 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 100 | 101.100.000 | 100 | 100 | 80 | 550 | 87 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 102 | 101.102.000 | 150 | 100 | 80 | 730 | 137 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 104 | 101.104.000 | 200 | 100 | 80 | 910 | 187 | 87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 120 | 101.120.000 | 120 | 120 | 100 | 1070 | 102 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 122 | 101.122.000 | 180 | 120 | 100 | 1310 | 162 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 124 | 101.124.000 | 240 | 120 | 100 | 1680 | 222 | 102 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 160 | 101.160.000 | 160 | 160 | 100 | 1520 | 142 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 162 | 101.162.000 | 240 | 160 | 100 | 1980 | 222 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 164 | 101.164.000 | 320 | 160 | 100 | 2480 | 302 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 166 | 101.166.000 | 480 | 160 | 100 | 3900 | 462 | 142 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 200 | 101.200.000 | 200 | 200 | 120 | 2480 | 180 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 202 | 101.202.000 | 300 | 200 | 120 | 3250 | 280 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 204 | 101.204.000 | 400 | 200 | 120 | 4700 | 380 | 180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 240 | 101.240.000 | 240 | 240 | 120 | 3400 | 220 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 242 | 101.242.000 | 360 | 240 | 120 | 4000 | 340 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 244 | 101.244.000 | 480 | 240 | 120 | 6100 | 460 | 220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 320 | 101.320.000 | 320 | 320 | 120 | 4900 | 300 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 322 | 101.322.000 | 480 | 320 | 120 | 6600 | 460 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AD 324 | 101.324.000 | 640 | 320 | 120 | 8700 | 620 | 300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
standard
available
not available
Samples & Quotes
Get your samples
Simply click on the basket symbol to add items to your personal list. You can then request samples and get a quotation. Learn more here
Print
Copyright © 2018 ROLEC Gehäuse-Systeme GmbH Germany Rinteln. All rights reserved. Please refer to
in case of any questions and comments.
