ROLEC United Kingdom
Tel: (01489) 583858
aluTWIN_TitleImageLarge
You are here: | | |

aluTWIN

  • Video
  • Photo Gallery



aluTWIN is a range of high-performance dual-chamber diecast aluminium enclosures for heavy duty electronics and electrical equipment. 

The design offers the option of installing the electronics and terminals in separate sections to protect them from each other during installation and servicing. The enclosures are based on our aluNORM product range and are weatherproof and watertight to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates etc.

We can supply aluTWIN enclosures fully customised to your requirements.

Enclosure sizes 4 sizes
Dimensions: L x W x H
166 x 100 x 55 mm to 240 x 240 x 103 mm
Additional info Secure connection technology due to the printed circuit boards or series terminals in connection spaces that can be opened separately
Both chambers can be separated with the isolation wall included
Different lid variants
Specially developed external mounting brackets made from diecast aluminium
Enclosure Diecast aluminium alloy
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
Fastening Space-saving single-channel technology for lid and fastening screws outside of the enclosure inte­rior
Internal mounting Fastening thread in lateral bars on the enclosure base.
Ingress protection IP 66 / EN 60529 
Optional: IP 67
Gasket Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
or TPE moulded gasket, silicone-free, temperature resistance: -40°C to +120°C
Optional: Silicone gasket, temperature resistance: -50°C to +140°C
Lid screws Stainless steel 1.4567, captive
Surface Powder coating 
Bottom: RAL 7035, light grey
Lid: RAL 7040, window grey
Optional: Special colours
Optional: Corrosion protection
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to aluTWIN

aluTWIN - Products

alu_twin_variante_standard
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
Measurement F
External mounting brackets
Silicon-gasket
Shielding
Hold hinges
Corrosion proof coating
Mounting plates
Hinges
Supporting rail for series terminals
Double-bit fastener
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
104.100.000 AT 100 104.100.000 166 100 81 770 87 87 40 External mounting brackets Silicon-gasket Shielding Hold hinges Corrosion proof coating Mounting plates Hinges Supporting rail for series terminals Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
104.160.000 AT 160 104.160.000 240 160 103 2170 142 142 103 External mounting brackets Silicon-gasket Shielding Hold hinges Corrosion proof coating Mounting plates Hinges Supporting rail for series terminals Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
104.162.000 AT 162 104.162.000 240 240 103 3900 222 142 103 External mounting brackets Silicon-gasket Shielding Hold hinges Corrosion proof coating Mounting plates Hinges Supporting rail for series terminals Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
105.100.000 ATF 100 105.100.000 166 100 55 730 87 87 40 External mounting brackets Silicon-gasket Shielding Hold hinges Corrosion proof coating Mounting plates Hinges Supporting rail for series terminals Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available