ROLEC United Kingdom
Tel: (01489) 583858
Aluminiumgehaeuse-conTROL-Rolec_TitleImageWide
You are here: | | |

conTROL

  • Photo Gallery
Unique design
The high rim protects all front components
Optimum protection from high collar rim
Switches and buttons are given optimum protection

conTROL is a robust and versatile range of  EMC shielded aluminium enclosures which is ideal for machine control equipment. The enclosures feature in-built shielding that does not require expensive and delicate conductive gaskets. Continuous contact is created by means of a patented tooth system pre-cast into the lid and base.

Standard features include a deep recessed lid which is designed to protect buttons and control switches. The enclosures are water-tight and weather resistant to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates, terminal rails etc. Accessories such as mounting plates and cable glands are also available.

We can supply conTROL enclosures fully customised to your requirements.

Enclosure sizes 4 sizes
Dimensions: L x W x H
129.8 x 84.8 x 55mm to 179.8 x 84.8 x 78mm
Additional info High shielding from radiation interference (EMC tested by the University of Hanover)
Collar protects command and information buttons
Inexpensive, as there is no need for expensive conductive gaskets
Large range of accessories
Enclosure Diecast aluminium alloy
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
Fastening Separate screw channels outside of the enclosure interior
Console panel integration with installation kit
Internal mounting M4 fastening thread in lateral bars on the enclosure base and optional fastening on the lid
Ingress protection IP 66 / EN 60529 
Optional: IP 67 / NEMA 4
Gasket TPE moulded gasket, silicone-free, temperature resistance: -40°C to +120°C
Optional: Silicone gasket, temperature resistance: -50°C to +140°C
Lid screws Stainless steel 1.4567, captive
Surface Powder coating RAL 7032, silky grey
Optional: Special colours
Optional: Corrosion protection
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to conTROL

conTROL - Products

con_trol_variante_standard
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
External mounting brackets
Silicon-gasket
Lid holders
Installation kit
Shielding
Corrosion proof coating
Mounting plates
Protection Class IP 67
Hinges
Supporting rail for series terminals
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
310.082.000 EKT 082 310.082.000 129.8 84.8 78 600 113 52 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
310.083.000 EKT 083 310.083.000 179.8 84.8 78 750 163 52 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
311.082.000 EKTF 082 311.082.000 129.8 84.8 55 450 113 52 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
311.083.000 EKTF 083 311.083.000 179.5 84.8 55 600 163 52 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available