ROLEC United Kingdom
Tel: (01489) 583858
Mobile-Steuergehaeuse-handCASE-Rolec_TitleImageWide
You are here: | | |

handCASE

  • Video
  • Photo Gallery



handCASE is a stylish and highly robust range of handheld enclosures in diecast aluminium. Thanks to their ergonomic design these enclosures sit very comfortably in the hand. The high strength of handCASE provides solid protection for internal electronics and components under the most extreme conditions.

The enclosures are tested to IP 66 protection class and are available with or without battery compartments for 1.5V AA and 9V cells. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates etc. Cable glands and other accessories are also available.

We can supply handCASE enclosures fully customised to your requirements.

Enclosure sizes 4 versions, 2 lid variants
Dimensions L x W x H
80 x 180 x 42.4 mm to 100 x 220 x 62.4 mm
Additional info Integrated recess in the lid for membrane keypad or front plates
Ergonomic design for non-fatiguing work
Alternative lid design for all enclosure sizes
Optional: Battery compartment made from ABS for 2 versions
Enclosure Die-cast aluminium allow:
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725).
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom
Fastening Optional: Holding clip (e.g. for strap)
Optional: Wall bracket for clip fastening
Optional: Carrying strap with protector
Internal mounting M3 fastening thread on the enclosure base and in the lid
Ingress protection IP 66 / EN 60529
Optional: IP 67 / EN
Free-fall DIN EN 60068-2-32
Gasket TPE moulded gasket, silicone-free, temperature resistance: -40°C to +120°C
Lid screws Stainless steel 1.4567, captive
Surface Powder coating
Lid: Silver metallic
Bottom: RAL 9005, deep black 
Optional: Special colours
ROLEC service Avail of our Full Service Offer for installation-ready enclosures


Documents/downloads Here you'll find all of the technical information and certificates relating to handCASE

Variante R

handcase_variante_r
 
Type
Part No.
Length
Width
Height
Weight (g)
Battery compartment
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
272.080.000 HCF 080 R 272.080.000 180 80 42.4 450 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
272.081.000 HCF 081 R 272.081.000 180 80 42.4 430 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
272.100.000 HCF 100 R 272.100.000 220 100 42.4 600 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
273.100.000 HC 100 R 273.100.000 220 100 62.4 660 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


handCASE - Products

handcase_variante_standard
 
Type
Part No.
Length
Width
Height
Weight (g)
Battery compartment
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
270.080.000 HCF 080 270.080.000 180 80 42.4 450 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
270.081.000 HCF 081 270.081.000 180 80 42.4 430 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
270.100.000 HCF 100 270.100.000 220 100 42.4 600 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
271.100.000 HC 100 271.100.000 220 100 62.4 660 Battery compartment PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available