mobilCASE is a modern and ergonomic range of extruded handheld enclosures which is ideal for handheld electronic instruments and mobile machine/robotic controllers. Three standard widths are available to suit a wide range of applications. The enclosures can be supplied in custom lengths on demand.
The assembly consists of an extruded case body, available as single or two part profiles for easy assembly of keypads, and tough diecast aluminium end caps which protect the unit when used indoors or outdoors. The cases are sealed to IP 54 or IP 65 protection classes. The case body is recessed on both sides for fitting a membrane keypad or product label. Optional battery holders for 2 or 4 AA cells can be located inside. Options include shoulder straps (PK) for easier transport, desktop tilt stands (ABF, ABK), an adapter (PG) for fitting two enclosures together, an M16 cable gland (KV), a hinged bracket (WH) and a holding bracket (CH).
We can supply mobilCASE enclosures fully customised to your requirements.
Enclosure sizes | 3 standard widths (80, 100, 130mm) in 2 versions Closed profile for insertion of circuit boards |
Divided profile (lid and frame) for easy assembly of short stroke keyboards | |
Additional info | Integrated recess in the lid for membrane keypad or front plates |
Flat end cover or end cover with collar to take plug sockets | |
Optional: Adapter with M16 cable gland for external power supply Optional: Clip holder for setting down mobile devices at the wall or machine Optional: Desk version for the combination of 2 profiles (also with different sections) | |
Optional: Shoulder strap with protective caps for mobile utilisation | |
Optional: Wall/desk fixation articulated with infinitely variable stand including flat end cover | |
Optional: Accumulator holder for 2 or 4 AA batteries | |
Material/colour | Extruded aluminium profile: AL Mg Si 0.5 / DIN 17615 |
Powder coating, silver metallic | |
Optional: Anodised | |
End cover (2 variants): Die-cast zinc alloy GD-Zn Al 4 Cu 1 / DIN EN 12844 | |
Powder coating, RAL 9005, deep black Optional: Special colours | |
Fastening | Optional: Clip holder for setting down devices at the wall or machine |
Optional: Articulated wall/desk fixation including stand | |
Internal mounting | For circuit board widths 80/100 (Eurocard)/130mm |
Ingress protection | Profile 1-part IP65 / EN 60529 |
Profile 2-part IP65 / EN 60529 | |
Desk version IP 54 / EN 60529 | |
Gasket | Lid: TPE moulded gasket, silicone-free, temperature resistance: -30°C to +100°C |
Profile: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C | |
Lid screws | Stainless steel 1.4567 |
Customising | Learn more about our full customising service for installation-ready enclosures |
Type |
Part No. |
Length |
Width |
Measurement P |
PDF-Drawing |
AutoCAD DXF-Format |
AutoCAD DWG Format |
3D-Model-Download |
Add to my list |
|
---|---|---|---|---|---|---|---|---|---|---|
![]() |
Profile P 80-1-120 | 250.080.120 | 120 | 118 | 80 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 80-1-160 | 250.080.160 | 160 | 118 | 80 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 100-1-160 | 250.100.160 | 160 | 138 | 100 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 100-1-200 | 250.100.200 | 200 | 138 | 100 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 130-1-180 | 250.130.180 | 180 | 168 | 130 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 130-1-240 | 250.130.240 | 240 | 168 | 130 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 80-2-120 | 251.080.120 | 120 | 118 | 80 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 80-2-160 | 251.080.160 | 160 | 118 | 80 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 100-2-160 | 251.100.160 | 160 | 138 | 100 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 100-2-200 | 251.100.200 | 200 | 138 | 100 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 130-2-180 | 251.130.180 | 180 | 168 | 130 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Profile P 130-2-240 | 251.130.240 | 240 | 168 | 130 |
![]() |
![]() |
![]() |
![]() |
![]() |