ROLEC United Kingdom
Tel: (01489) 583858
Kommandogehaeuse-multiPANEL-Rolec
You are here: | |

multiPANEL

  • Video
  • Photo Gallery



multiPANEL offers the option of integrating every conceivable application. The enclosure front of the »multiPANEL DISPLAY« facilitates the permanent installation of a front plate or glass front, e.g. for touch applications. Almost borderless, with flush installation and permanently connected with the enclosure. Suitable cut-outs for switches and more are included in the service provided by ROLEC, and are established in the production department at the German headquarters in accordance with customer specifications.

It is possible to directly integrate commercially available built-in panels in the front of the »multiPANEL KOMMANDO« enclosure. A small recess in the framework enables almost flush integration of the PC here. Furthermore, front plates can be inset in the frame from the front or rear, and fastened in place with clamping pieces. The combination of direct panel installation and a part front plate is also possible.

With the flat multiPANEL 70 version, the rear wall is optionally available with a flush rear wall, which can be supplied as a fully bolted version or with hinges where required. A robust, 15mm deep, framed door including lock and internal hinges offers a greater installation depth. This results a multiPANEL enclosure depth of 85mm. Furthermore, a 60mm deep framed door version is also available for an even greater enclosure depth, which is also equipped with a lock and internal hinges. The total depth with this version is 130mm. Internal mountings can naturally also be installed in the door. For this purpose, stays are fitted inside the door on request by the customer, in preparation for the technical installation. Furthermore, a circumferential groove is available inside the 60mm deep door, for mounting clamping pieces.

Enclosure sizes Made to customer required sizes
L x W x H max. 800 x 800 x 70/85/130 mm
Additional infos Puristic, multi-variable design for modern machines
Profile enclosure – produced to the precise millimetre
Three enclosure depths: 70, 85 and 130 mm
Five front installation options
Direct access possible with three door designs
Material/Colour Extruded aluminium
Aluminium corner pieces mounted with aluminium profiles
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle: POM RAL 9005, with stainless steel inlay V2A
Enclosure lock: rear wall bolted (only MPD 00 and MPK 00), lock and hinge, black
Fastening With the suspension arm system profiPLUS 50 Panel coupling
Internal mounting Slide-in contour for spring nuts M4/M5
Ingress protection IP 65 / EN 60529
Gasket
Surface Powder coating RAL 9005 Deep black, fine structure
Optional: other colours
ROLEC service  Full Customising Service  for installation-ready enclosures
Documents / downloads Here you'll find all of the technical information and certificates relating to multiPANEL

multiPANEL Display - With almost borderless, flush installed and permantly connected frontplate

 
Type
Part No.
Silicon-gasket
Internal hinges
Handle
Mounting plates
Hinges
Double-bit fastener
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
320.000.000 MPD 00 - bolted rear wall 320.000.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
320.110.000 MPD 11 - bolted door 320.110.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
320.150.000 MPD 15 - 15mm framed deeper door 320.150.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
320.600.000 MPD 60 - 60mm framed deeper door 320.600.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


multiPANEL Kommando - with aluminium front plate inset from the front

 
Type
Part No.
Silicon-gasket
Internal hinges
Handle
Mounting plates
Hinges
Double-bit fastener
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
321.000.000 MPK 00 - bolted rear wall 321.000.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.110.000 MPK 11 - bolted door 321.110.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.150.000 MPK 15 - 15mm framed deeper door 321.150.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.600.000 MPK 60 - 60mm framed deeper door 321.600.RGS Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


multiPANEL Kommando FPI - with aluminium front plate inset from the rear

 
Type
Part No.
Silicon-gasket
Internal hinges
Handle
Mounting plates
Hinges
Double-bit fastener
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
321.000.000 MPK 00 - bolted rear wall 321.000.FPI Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.110.000 MPK 11 - bolted door 321.110.FPI Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.150.000 MPK 15 - 15mm framed deeper door 321.150.FPI Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
321.600.000 MPK 60 - 60mm framed deeper door 321.600.FPI Silicon-gasket Internal hinges Handle Mounting plates Hinges Double-bit fastener PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


multiPANEL accessories

 
Type
Part No.
Weight (g)
Corrosion proof coating
Tilting
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
Add to my list
TAS.450.STR Keyboard tray 380mm, rigid 503.320.380 820 Corrosion proof coating Tilting PDF AutoCAD AutoCAD Add to my list
503.320.451 Keyboard tray 450mm, swiveling Keyboard tray 380mm, swiveling 503.320.381 820 Corrosion proof coating Tilting PDF AutoCAD AutoCAD Add to my list
TAS.450.STR Keyboard tray 450mm, rigid 503.320.450 1150 Corrosion proof coating Tilting PDF AutoCAD AutoCAD Add to my list
503.320.451 Keyboard tray 450mm, swiveling Keyboard tray 450mm, swiveling 503.320.451 1138 Corrosion proof coating Tilting PDF AutoCAD AutoCAD Add to my list
507.000.014 Mouse tray for 450mm keyboard tray Mouse tray for 450mm keyboard tray 507.000.014 445 Corrosion proof coating Tilting PDF AutoCAD AutoCAD Add to my list
standard standard   available available   not available  not available