ROLEC United Kingdom
Tel: (01489) 583858
Kommandogehaeuse-multiVISION-Display-Rolec_TitleImageWide
You are here: | |

multiVISION Display


multiVISION Display is a versatile display enclosure made from aluminium profiles. The enclosures are available in nine depths using a combination of three different case profiles. Each enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. Hinges and a lock can be fitted to the rear for quick access inside. An optional handle system enables easy positioning when the unit is fitted to a suspension arm.

multiVISION Display is compatible with all ROLEC suspension arm systems.

Enclosure sizes Made to customer required sizes
L x W x H max. 800 x 800 x 360 mm
Additional info Versatile display and operating enclosure
Articulated front and rear wall door
Dimensions as per customer requirements
Assembly of front plates without visible screws
Enclosure Extruded aluminium
Door: Aluminium corner pieces mounted with aluminium profiles
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible
Fastening On a ROLEC suspension arm system or with external mounting brackets
Internal mounting Slide-in contour for spring nuts M4/M5
Ingress protection IP 65 / EN 60529
Gasket Enclosure: Chloroprene profile gasket (CR), temperature resistance: -30°C to +90°C
Front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
Surface Powder coating RAL 7040, window grey
Optional: Special colours
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to multiVISION Display

multiVISION Display - Products

 
Type
Part No.
Profile
External mounting brackets
Handle system
Mounting plates
Double-bit fastener
WA
XA
Level-fastener
Level-fastener with lock
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
MVDK multiVISION-Display MVD-01 60 mm MVD-01 D1 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-02 120 mm MVD-02 D2 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-03 60/60 mm MVD-03 D3 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-04 60/120 mm MVD-04 D4 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-05 120/120 mm MVD-05 D5 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-06 180 mm MVD-06 D6 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-07 60/180 mm MVD-07 D7 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-08 120/180 mm MVD-08 D8 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-09 180/180 mm MVD-09 D9 External mounting brackets Handle system Mounting plates Double-bit fastener WA XA Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available