ROLEC United Kingdom
Tel: (01489) 583858
Kommandogehaeuse-multiVISION-Kommando-Rolec_TitleImageWide
You are here: | |

multiVISION Kommando


multiVISION Kommando is a range of command enclosures made from aluminium profiles. The enclosures are highly versatile and robust, and being made-to-measure, allow maximum flexibility for housing machine control equipment.

The enclosure assembly consists of aluminium profiles, in three different sizes, that are combined to give different case depths and front and rear formats. Each multiVISION enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. The enclosures can be hinged with a lock for easy access inside. Optional handle bars can also be fitted for positioning when the enclosure is fitted to a suspension arm. A desk version can also be supplied (with separate display and operating enclosure).

multiVISION Kommando is compatible with all ROLEC suspension arm systems.

Enclosure sizes Made to customer required sizes
L x W x H max. 800 x 800 x 300 mm
Additional info Versatile control and command enclosure
Articulated front and rear wall door
Assembly of front plates without visible screws
Enclosure Extruded aluminium
Door: Aluminium corner pieces with aluminium profiles 
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible
 
Fastening To a ROLEC suspension arm system or external mounting brackets
Internal mounting Slide-in contour for spring nuts M4/M5
Ingress protection IP 65 / EN 60529
Gasket Enclosure and front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
Surface Powder coating RAL 7040, window grey
Optional: Special colours
ROLEC service Avail of our Full Service Offer for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to multiVISION

multiVISION Kommando - Products

 
Type
Part No.
Profile
Handle system
Mounting plates
Slotted head screw
Triangular screw
Collar-head screw
Level-fastener
Level-fastener with lock
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
MVK-01 K multiVISION-Kommando MVK-01 120 mm MVK-01 K1 Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-02 120/60 mm MVK-02 K2 Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-03 120/120 mm MVK-03 K3 Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-04 120/180 mm MVK-04 K4 Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available