ROLEC United Kingdom
Tel: (01489) 583858
Polyestergehaeuse-polyTOP-Ex-Rolec_TitleImageWide
You are here: | | |

polyTOP-Ex

  • Photo Gallery
Modular enclosure made from glass-fibre reinforced polyester
Corrosion-resistant polyamide lid screws
Large selection of locking plugs
Exterior hinges also available

IP 65

polyTOP-EX enclosures are made of glass-fibre reinforced polyester. The enclosures are tested to IP 65 protection class and can be supplied as empty enclosures or as Ex e and Ex i models. A range of accessories such as Ex cable glands and much more is available.

Enclosure sizes 13 sizes

Dimensions L x W x H

82 x 82 x 60mm to 404 x 404 x 160mm
Further information Application-specific accessories such as mounting plates made from galvanised sheet steel, series terminals etc.

Optional: Approved Ex e and Ex i cable glands from various manufacturers

Optional: Approved Ex e and Ex i series terminals from various manufacturers


Empty enclosure approvals II 2 GD Ex e II tD A21 IP65

KEMA 02ATEX2053 U


Operational temperature range -40°C to +100°C


Terminal enclosure approvals II 2 GD Ex e II T6 tD A21 T80°C IP65

II 2 GD Ex e ia IIC T6 tD A21 T80°C IP65

II 1 G Ex ia IIC T6 IP65

KEMA 02ATEX2053


Ambient temperature range -40°C to +40°C


Earth connection In the interior through earth bar or PE terminals


Enclosure  Polyester glass fibre reinforced, halogen-free

similar to RAL 9005, deep black,   surface resistance<  109 Ohm

1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.


Flammability UL 94 V-0


Fastening  Single-channel lid and assembly fastening outside of the enclosure interior
Optional: External mounting brackets made from stainless steel


Internal mounting  M4/M6 threaded bushing on the enclosure base


Ingress protection IP 65 / EN 60529


Gasket  Tongue and groove system with silicone gasket, temperature range: -50°C to +140°C


Lid screws  Polyamide, corrosion-resistant and captive
Customising Learn more about our full customising service for installation-ready enclosures

PT-Exi Dimensions

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
External mounting brackets
Earthbar
Captive allen screw
Mounting plates
Hinges
Supporting rail for series terminals
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
139.080.000 PT-Exi 080 139.080.000 82 82 60 240 67 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.082.000 PT-Exi 082 139.082.000 122 82 60 340 107 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.084.000 PT-Exi 084 139.084.000 162 82 60 420 147 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.100.000 PT-Exi 100 139.100.000 102 102 81 520 87 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.102.000_ProductInfoImageList PT-Exi 102 139.102.000 152 102 81 650 137 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.104.000 PT-Exi 104 139.104.000 202 102 81 770 187 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.120.000 PT-Exi 120 139.120.000 124 124 100 800 102 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.122.000 PT-Exi 122 139.122.000 184 124 100 860 162 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.124.000 PT-Exi 124 139.124.000 244 124 100 920 222 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.160.000 PT-Exi 160 139.160.000 164 164 100 820 142 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.162.000 PT-Exi 162 139.162.000 244 164 100 1100 222 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
139.164.000 PT-Exi 164 139.164.000 324 164 100 1340 302 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


PT-Ex-leer Dimensions

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
External mounting brackets
Earthbar
Captive allen screw
Mounting plates
Hinges
Supporting rail for series terminals
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
138.080.000 PT-Ex-Leer 080 138.080.000 82 82 60 240 67 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.082.000 PT-Ex-Leer 082 138.082.000 122 82 60 340 107 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.084.000 PT-Ex-Leer 084 138.084.000 162 82 60 420 147 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.100.000 PT-Ex-Leer 100 138.100.000 102 102 81 520 87 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.102.000 PT-Ex-Leer 102 138.102.000 152 102 81 650 137 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.104.000 PT-Ex-Leer 104 138.104.000 202 102 81 770 187 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.120.000 PT-Ex-Leer 120 138.120.000 124 124 100 800 102 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.122.000 PT-Ex-Leer 122 138.122.000 184 124 100 860 162 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.124.000 PT-Ex-Leer 124 138.124.000 244 124 100 920 222 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.160.000 PT-Ex-Leer 160 138.160.000 164 164 100 820 142 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.162.000 PT-Ex-Leer 162 138.162.000 244 164 100 1100 222 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
138.164.000 PT-Ex-Leer 164 138.164.000 324 164 100 1340 302 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available


PT-Exe Dimensions

VariationInfoImage1x1
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
External mounting brackets
Earthbar
Captive allen screw
Mounting plates
Hinges
Supporting rail for series terminals
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
137.080.000 PT-Exe 080 137.080.000 82 82 60 240 67 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.082.000 PT-Exe 082 137.082.000 122 82 60 340 107 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.084.000 PT-Exe 084 137.084.000 162 82 60 420 147 67 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.100.000 PT-Exe 100 137.100.000 102 102 81 520 87 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.102.000 PT-Exe 102 137.102.000 152 102 81 650 137 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.104.000 PT-Exe 104 137.104.000 202 102 81 770 187 87 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.120.000 PT-Exe 120 137.120.000 124 124 100 800 102 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.122.000 PT-Exe 122 137.122.000 184 124 100 860 162 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.124.000 PT-Exe 124 137.124.000 244 124 100 920 222 102 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.160.000 PT-Exe 160 137.160.000 164 164 100 820 142 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.162.000 PT-Exe 162 137.162.000 244 164 100 1100 222 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
137.164.000 PT-Exe 164 137.164.000 324 164 100 1340 302 142 External mounting brackets Earthbar Captive allen screw Mounting plates Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available