ROLEC United Kingdom
Tel: (01489) 583858
ROLEC Sealed Enclosures
You are here: | |

Sealed Enclosures

IP rated enclosures for industrial electronics

ROLEC industrial enclosures are tested according to the IEC 60529 standard for ingress protection. Depending upon the range, the enclosures are rated: IP 54, IP 65, IP 66, IP 67 or IP 69K (optional).

Intelligent design features include ‘lid closed’ installation to protect the seal and electronics. Some models have built-in EMC shielding so you won’t need a separate gasket. All ROLEC standard enclosures can be customised ready for your electronics.

Choose from: diecast aluminium; stainless steel (can be electropolished for added resistance to corrosion); glass-fibre reinforced polyester (highly resistant to chemicals); Luran (for added UV stability) or ABS.

High protection classes available:

View our full range of sealed enclosures below:

Sealed Enclosures

aluCASE

Our premium enclosures range in diecast aluminium

• Recessed lids accommodate membrane keypads, front plates or labels

• Clip-on design covers hide the lid fixings and mounting screws

• The enclosures can be mounted without opening the lid

• IP 67 / EN 60529, IP 69K / DIN 40050

aluDISC

An absolute all-rounder in every respect

• The world's first round aluminium enclosures for industrial electronics

• Recessed lids accommodate membrane keypads, front plates or labels

• The enclosures can be mounted without opening the lid

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

aluPLUS

The plus side of our diecast aluminium enclosures

• Designer enclosures with technical finesse in industry-standard sizes

• Recessed lids for fitting membrane keypads, face plates or product labels

• Enclosures can be mounted without opening the lid

• IP 66, IP 67 / EN 60529

aluCLIC

Aluminium enclosures with quick-change mounting device

• World's first quick-change enclosures

• Extra roomy on the inside for the components

• Fully usable enclosure front area – virtually frameless

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

aluSMART

Practical aluminium enclosures with stainless steel mounting device

• Full size recessed area on the front for a membrane keypad or label

• Extremely generous space inside for the electronics

• Secure and discrete screw fastening, from behind

• IP 67 / EN 60529, IP 69K / ISO 20653

aluNORM

Multivariable diecast aluminium enclosures for industrial equipment

• Versatile universal design with space-saving single channel fixings

• Various enclosure combinations available (standard, dual, flat, high)

• Product has proven itself time and time again

• IP 66, IP 67 / EN 60529, NEMA 4

conFORM

Versatile diecast aluminium enclosures with in-built EMC shielding

• Inexpensive and robust EMC housings in a useful range of sizes

• Integrated tooth system between lid and base for bonding

• No delicate and expensive EMC gaskets required

• IP 66, IP 67 / EN 60529, NEMA 4

conTROL

Deeply recessed aluminium 'collar' enclosures for protecting controls

• Inexpensive and robust with in-built EMC shielding

• Ideal for all types of industrial control equipment

• Special lid with integrated frame protects the control buttons

• IP 66, IP 67 / EN 60529, NEMA 4

aluKOM

Classic, industry standard diecast aluminium enclosures for industrial equipment

• Inexpensive and highly versatile housings

• Wide range of standard sizes

• IP 66 / EN 60529

aluTWIN

The ultimate heavy duty dual-chamber aluminium enclosures

• Two-chamber design with separate connection spaces

• Space-saving single-channel fixing technology

• Also available with front plate for front control panels

• IP 66 / EN 60529

aluFACE

Versatile control/command enclosures in diecast aluminium

• Fixed or hinged front frames with recessed front panels

• Models with separate terminal compartment

• Range of options including locks, hinges and handle bars

• IP 65 to IP 67/ EN 60529

handCASE

Modern and highly robust handheld enclosures in diecast aluminium

• Ergonomic design that is comfortable to hold

• Recessed lid for fitting a membrane keypad or product label

• With or without battery compartments

• IP 66, IP 67 / EN 60529

mobilCASE

Modern and ergonomic extruded aluminium handheld enclosures

• Available in three widths – custom lengths on demand

• Can also be used as a wall or desk enclosure

• Integrated 1.5V AA battery compartments

• IP 54, IP 65 / EN 60529

polyTOP

Modern highly resistant enclosures in glass-fibre reinforced polyester

• Versatile weather-resistant design in 12 sizes

• Corrosion-resistant polyamide lid screws

• Optional lid fixings for access or tamper protection

• IP 66, IP 67 / EN 60529, NEMA 4

polyDOOR

Highly resistant GRP polyester enclosures with hinged front lids

• Tough and practical design in 8 standard sizes

• With or without transparent window in the lid

• Optional lid fixings for access or tamper protection

• IP 66 / EN 60529, NEMA 4

polyKOM

Practical and economic standard enclosures in glass-fibre reinforced polyester

• Weather resistant

• Robust and resistant to environmental influences

• Industry standard dimensions

• IP 65 / EN 60529

technoPLUS

Advanced plastic enclosures designed for modern outdoor electronics

• Moulded in high quality UV-stable Luran material

• Unique pole/mast attachment for fitting outside

• Recessed lids for membrane keypads or product labels

• IP 66, IP 67 / EN 60529, IP 69 K / ISO 20653

starCASE

Advanced plastic enclosures moulded in flame-retardant Luran

• Very modern and ergonomic design in 8 sizes

• Recessed lid for fitting a membrane keypad or product label

• Hinges design covers hide all fixing screws

• IP 66 / EN 60529

technoCASE

Multivariable enclosures made from ABS with designer cover strips

• Lids and bottoms can be combined with each other as desired

• Recessed lids for membrane keypads, front plates or labels

• Six design cover colours to choose from

• IP 66, IP 67 / EN 60529

technoBOX

Modern and low cost enclosures for electronics and electrical devices

• Elegant and tough design moulded in ABS

• Attractive bevelled lid with captured screws

• Recessed lid for fitting a membrane keypad or label

• IP 66 / EN 60529

inoCASE A2

Innovative A2 stainless steel enclosures for high protection

• Useful range of standard sizes

• Patented single-channel technology – gives more space inside

• Mounting holes outside of the sealed area

• IP 66, IP67 / EN 60529, IP 69K / ISO 20653

inoCASE A2 mini

Innovative mini A2 stainless steel enclosures for high protection

• Useful range of small sizes

• Patented single-channel technology – gives more space inside

• Mounting holes outside of the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

inoCASE A4

Innovative A4 stainless steel enclosures for very high protection

• Useful range of standard sizes

• Separate fastening channels outside of the enclosure interior

• Mounting without flanges or holes inside the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

inoCASE A4 mini

Innovative mini A4 stainless steel enclosures for very high protection

• A4 stainless steel enclosures in small sizes

• Separate fastening channels outside the enclosure interior.

• Mounting without flanges or holes inside the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

commandCASE

Modern cost-effective command enclosures that inspire different thinking

• Ergonomic design with elegant front panel handles

• Lids are screw fixed or hinged with quick-lock or key lock

• Perfectly matches our profiPLUS suspension arm system

• IP 66 / EN 60529

multiPANEL

Advanced command enclosures for modern machine control

• Profile enclosure from 150 to 800mm – made-to-measure

• Five front installation options including touchpanels

• Three enclosure depths: 70, 85 and 130 mm

• IP 65 / EN 60529

multiVISION Display

Variable display and command enclosures made from aluminium profiles

• Modern display enclosures with or without handle bar system

• Three profile sizes - gives nine standard depths

• Made to customer required width and height dimensions

• IP 65 / EN 60529

multiVISION Kommando

Variable display and command enclosures made from aluminium profiles

• For mounting to suspension arm systems

• Made to customer required width and height dimensions

• Available with or without handle bar system

• IP 65 / EN 60529

topVISION

Ergonomic, versatile and economic command enclosures

• Sheet steel body with aluminium framework

• Available with or without handle system (RAL 3020 or 9005)

• IP 54 / EN 60529