ROLEC United Kingdom
Tel: (01489) 583858
multiPANEL-ROLEC-Konfigurator
You are here: | | |

multiPANEL Display - with aluminium front plate



multiPANEL Display 70 with aluminium front plate,
and bolted flush rear wall  

The front plate is glued flush in the enclosure frame. The plate can be supplied fully customised with all the necessary modifications. The rear wall is bolted flush. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Display.

multiPANEL Display 70 with aluminium front plate,
and bolted flush door 

The front plate is glued flush in the enclosure frame. The plate can be supplied fully customised with all the necessary modifications. The bolted door is equipped with hinges and enables simple opening without completely removing the rear wall. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Display.

multiPANEL Display 85 with aluminium front plate, and 15 mm deep framed door 

The front plate is glued flush in the enclosure frame. The plate can be supplied fully customised with all the necessary modifications. The 15 mm deep framed door is equipped with internal hinges and double‐bit fastener. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Display.

multiPANEL Display 130 with aluminium front plate, and 60 mm deep framed door 

The front plate is glued flush in the enclosure frame. The plate can be supplied fully customised with all the necessary modifications. The 60 mm deep framed door is equipped with internal hinges and double‐bit fastener. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Display.