multiVISION enclosures application

multiVISION command

Type MVK-03 twin section enclosure hinged with side lock

Model MVK-01 with hinged back panel and lock

Suitable for mounting to ROLEC suspension arm systems

Handle system RAL 3020, traffic red

Handle system RAL 9005, deep black


multiVISION Kommando

Variable display and command enclosures made from aluminium profiles

IP 65

multiVISION Kommando is a range of command enclosures made from aluminium profiles. The enclosures are highly versatile and robust, and being made-to-measure, allow maximum flexibility for housing machine control equipment.

The enclosure assembly consists of aluminium profiles, in three different sizes, that are combined to give different case depths and front and rear formats. Each multiVISION enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. The enclosures can be hinged with a lock for easy access inside. Optional handle bars can also be fitted for positioning when the enclosure is fitted to a suspension arm. A desk version can also be supplied (with separate display and operating enclosure).

multiVISION Kommando is compatible with all ROLEC suspension arm systems.

Generate PDF

  Type Part No. Profile Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock Download 3D-Model-Download Add to my list
MVK-01 K multiVISION-Kommando MVK-01 120 mm MVK-01 K1 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-02 120/60 mm MVK-02 K2 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-03 120/120 mm MVK-03 K3 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-04 120/180 mm MVK-04 K4 o o o o o o Download 3D-Model-Download Add to my list
  Part No. Add to my list
MVK-01 K MVK-01 Add to my list
MVK04K MVK-02 Add to my list
MVK04K MVK-03 Add to my list
MVK04K MVK-04 Add to my list
⬤ standard   o available   - not available

Enclosure sizes

Made to customer required sizes
L x W x H max. 800 x 800 x 300 mm

Additional info

Versatile control and command enclosure
Articulated front and rear wall door
Assembly of front plates without visible screws


Extruded aluminium
Door: Aluminium corner pieces with aluminium profiles 
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible


To a ROLEC suspension arm system or external mounting brackets

Internal mounting

Slide-in contour for spring nuts M4/M5

Ingress protection

IP 65 / EN 60529


Enclosure and front plate: Chloroprene O-ring gasket (CR)


Powder coating RAL 7040, window grey
Optional: Special colours


Learn more about our full customising service for installation-ready enclosures


671 KB
822 KB

Enclosures tolerance

107 KB


585 KB
349 KB

Ingress protection

281 KB


54 KB

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

© 2022 ROLEC · All rights reserved