mobilCASE enclosures application
mobilCASE enclosures application
mobilCASE versatile extruded aluminium enclosures for handheld electronics
mobilCASE versatile extruded aluminium enclosures for handheld electronics
mobilCASE single part closed enclosure profile for slide-in PCBs (IP 65)
mobilCASE single part closed enclosure profile for slide-in PCBs (IP 65)
mobilCASE two part open enclosure profiles for fitting PCB assemblies with keypads, displays etc. (IP 54)
mobilCASE two part open enclosure profiles for fitting PCB assemblies with keypads, displays etc. (IP 54)
End Cover Kit DF - 2 flat end covers, 2 TPE seals, fixings
End Cover Kit DF - 2 flat end covers, 2 TPE seals, fixings
End Cover Kit DK - 1 deep end cover with M16 screw plug, 1 flat end cover, 2 TPE seals, fixings
End Cover Kit DK - 1 deep end cover with M16 screw plug, 1 flat end cover, 2 TPE seals, fixings
M16 plug (with deep end cover) gives access to the battery compartment in the profiles
M16 plug (with deep end cover) gives access to the battery compartment in the profiles
Accessory adaptor with M16 cable gland (replaces screw plug)
Accessory adaptor with M16 cable gland (replaces screw plug)
mobilCASE optional adjustable stand kits
mobilCASE optional adjustable stand kits
Stand kit ABF - 2 flat end covers with tilt stand
Stand kit ABF - 2 flat end covers with tilt stand
Stand kit ABK - flat end cover with tilt stand, deep end cover with M16 plug
Stand kit ABK - flat end cover with tilt stand, deep end cover with M16 plug
Optional wall/desk pivot mount brackets
Optional wall/desk pivot mount brackets
Pivot mount set WH - with 2 flat end covers
Pivot mount set WH - with 2 flat end covers
Accessory set PK - shoulder strap with protective caps for carrying the unit
Accessory set PK - shoulder strap with protective caps for carrying the unit
Holder for storing the unit on a machine or wall
Holder for storing the unit on a machine or wall
Accessory set CH - enclosure holder
Accessory set CH - enclosure holder
Combination kit PG - connects two case profiles
Combination kit PG - connects two case profiles
mobilCASE enclosures application
mobilCASE versatile extruded aluminium enclosures for handheld electronics
mobilCASE single part closed enclosure profile for slide-in PCBs (IP 65)
mobilCASE two part open enclosure profiles for fitting PCB assemblies with keypads, displays etc. (IP 54)
End Cover Kit DF - 2 flat end covers, 2 TPE seals, fixings
End Cover Kit DK - 1 deep end cover with M16 screw plug, 1 flat end cover, 2 TPE seals, fixings
M16 plug (with deep end cover) gives access to the battery compartment in the profiles
Accessory adaptor with M16 cable gland (replaces screw plug)
mobilCASE optional adjustable stand kits
Stand kit ABF - 2 flat end covers with tilt stand
Stand kit ABK - flat end cover with tilt stand, deep end cover with M16 plug
Optional wall/desk pivot mount brackets
Pivot mount set WH - with 2 flat end covers
Accessory set PK - shoulder strap with protective caps for carrying the unit
Holder for storing the unit on a machine or wall
Accessory set CH - enclosure holder
Combination kit PG - connects two case profiles
mobilCASE_video_group_en

mobilCASE

The mobile, profile control enclosure

IP 54 / IP 65

The key product features:
• Enclosure material: aluminium profile
• Lid material: diecast zinc
• Enclosure surface: Profile silver-metallic, Lid RAL 9005
• Available as 1-part and 2-part profile
• Lid screws stainless steel 1.4567
• 1-part profile for the insertion of circuit boards
• 2-part profile for the easy assembly of short-stroke keyboards or displays
• Integrated recess for a membrane keypad or front membrane
• Ingress protection: 1-piece profile IP 65; 2-piece profile IP 54
• Lid gasket: TPE moulded gasket, silicone-free, Gasket, 2-part profile: O-ring gasket (CR)

More

mobilCASE is a modern and ergonomic range of extruded enclosures which is ideal for handheld electronic instruments and mobile machine/robotic controllers. Three standard widths are available to suit a wide range of applications. The enclosures can be supplied in custom lengths on demand. Each enclosure consist of a case profile and two end covers which are supplied with TPE moulded sealing gaskets and a screw kit. There are various types of end cover kits and accessories to suit different uses and installation set-ups. The enclosures are specified from individual kits.

HOW TO CONFIGURE YOUR mobilCASE ENCLOSURES

1). Enclosure Profile

Select the size and type of enclosure profile you need from the table below (click on part no.). The profiles are specified in PCB widths: 80, 100 and 130 mm (Dim. P). Types: 1-Part (IP 65) single profile for slide-in PCBs or 2-Part (IP 54) open profile which allows for keypads, displays etc. to pass through the top (when machined).

2). End Covers Kit

Select a suitable end cover kit from the accessories section. All cover kits include two TPE moulded seals and a screw kit. Options:

  • Set DF - two flat end covers 
  • Set DK - one flat and one deep end cover with M16 screw plug (for battery compartment access)
  • Set ABF - adjustable tilt stand with two flat end covers
  • Set ABK - adjustable tilt stand with one flat and one deep end cover with M16 screw plug  
  • Set WH - wall/machine pivot mount bracket with two flat end covers 
  • Set PG - two rotating end covers for connecting two units together.

3). Accessories

Select any optional accessories:

  • Set PK - shoulder strap with two protection caps for carrying the unit 
  • Set CH - case holder for storing the unit on a wall or machine
  • Set AH - battery holders for 2 or 4 1.5V AA cells  
  • Set KV - M16 cable gland adaptor kit (replaces screw plug on deep end covers).

CONFIGURATOR
You can also specify these enclosures in custom sizes using the mobilCASE configurator.

CUSTOMIZED VERSIONS
We can supply mobilCASE enclosures fully machined and finished to your requirements.

Request offer PDF datasheet
Product overview Dimensions Data Sheets Data
Enclosure profiles3 standard PCB widths (Dim. P: 80 mm, 100 mm, 130 mm) in 2 versions
Additional infoIntegrated recess in the profiles for a membrane keypad or product label 
Die-cast flat end covers or deep end covers with collar to protect plug connectors
Optional: Adapter with M16 cable gland for external power supply
Optional: Case holder for storing the unit on the wall or machine
Optional: Combination kit for connecting two profiles (also with different sections)
Optional: Shoulder strap with protective caps for portable instruments
Optional: Adjustable tilt stand kits including end covers
Optional: Battery holders for 2 or 4 AA batteries
Material/colourExtruded aluminium profile: AL Mg Si 0.5 / DIN 17615
Powder coating, silver metallic
Optional: Anodised
End cover (2 variants): Die-cast zinc alloy GD-Zn Al 4 Cu 1 / DIN EN 12844
Powder coating, RAL 9005, deep black
Optional: Special colours
FasteningOptional: Clip holder for setting down devices at the wall or machine
Optional: Articulated wall/desk fixation including stand
Internal mountingFor circuit board widths 80 mm/100 mm (Eurocard)/130mm
Ingress protectionProfile 1-part IP 65 / EN 60529
Profile 2-part IP 54 / EN 60529
Set PG IP 54 / EN 60529
GasketLid: TPE moulded gasket, silicone-free
Profile: Chloroprene O-ring gasket (CR)
Lid screwsStainless steel 1.4567
CustomisingLearn more about our full customising service for installation-ready enclosures

Call our central office
+44 (0) 1489 583858

Write us a mail
sales@rolec-enclosures.co.uk

or use our
contact form