multiVISION display, single-part profile D2

Combo D4 lock and hinge (side W)

D2 back panel with lock and hinge

Optional suspension systems taraPLUS or QUADRO

Handle system RAL 3020, traffic red

Handle system RAL 9005, deep black

 
 

multiVISION Display

Variable display and command enclosures made from aluminium profiles

GOST

IP 65

multiVISION Display is a versatile display enclosure made from aluminium profiles. The enclosures are available in nine depths using a combination of three different case profiles. Each enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. Hinges and a lock can be fitted to the rear for quick access inside. An optional handle system enables easy positioning when the unit is fitted to a suspension arm.

multiVISION Display is compatible with all ROLEC suspension arm systems.

Generate PDF
 
 
 



  Type Part No. Profile External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-01 60 mm MVD-01 D1 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-02 120 mm MVD-02 D2 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-03 60/60 mm MVD-03 D3 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-04 60/120 mm MVD-04 D4 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-05 120/120 mm MVD-05 D5 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-06 180 mm MVD-06 D6 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-07 60/180 mm MVD-07 D7 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-08 120/180 mm MVD-08 D8 o o o o o Download 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-09 180/180 mm MVD-09 D9 o o o o o Download 3D-Model-Download Add to my list
  Part No. Add to my list
MVDK MVD-01 Add to my list
MVDK MVD-02 Add to my list
MVDK MVD-03 Add to my list
MVDK MVD-04 Add to my list
MVDK MVD-05 Add to my list
MVDK MVD-06 Add to my list
MVDK MVD-07 Add to my list
MVDK MVD-08 Add to my list
MVDK MVD-09 Add to my list
 
⬤ standard   o available   - not available


 
 
Certifications

GOST

Enclosure sizes

Made to customer required sizes
L x W x H max. 800 x 800 x 360 mm

Additional info

Versatile display and operating enclosure
Articulated front and rear wall door
Dimensions as per customer requirements
Assembly of front plates without visible screws

Enclosure

Extruded aluminium
Door: Aluminium corner pieces mounted with aluminium profiles
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible

Fastening

On a ROLEC suspension arm system or with external mounting brackets

Internal mounting

Slide-in contour for spring nuts M4/M5

Ingress protection

IP 65 / EN 60529

Gasket

Enclosure: Chloroprene profile gasket (CR), temperature resistance: -30°C to +90°C
Front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C

Surface

Powder coating RAL 7040, window grey
Optional: Special colours

Customising

Learn more about our full customising service for installation-ready enclosures

Approval

2,087 KB
 

Catalog

671 KB
822 KB
 

Enclosures tolerance

107 KB
 

Gasket

52 KB
349 KB
 

Ingress protection

281 KB
 

Surface

54 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2019 ROLEC · All rights reserved