1. multiPANEL fitted with B&R display panel
2. multiPANEL fitted with B&R display panel
3. multiPANEL fitted with B&R display panel
4. multiPANEL fitted with B&R display panel
Five practical options for front installation of the equipment
Three standard enclosure depths: 70, 85 or 130mm
multiPANEL Display for permanent installation of a front plate or glass front for touch applications
Ergonomic handle for easy positioning of the enclosure
multiPANEL body available in any chosen RAL colour
multiPANEL offers the option of integrating every conceivable application. The enclosure front of the »multiPANEL DISPLAY« facilitates the permanent installation of a front plate or glass front, e.g. for touch applications. Almost borderless, with flush installation and permanently connected with the enclosure. Suitable cut-outs for switches and more are included in the service provided by ROLEC, and are established in the production department at the German headquarters in accordance with customer specifications.
It is possible to directly integrate commercially available built-in panels in the front of the »multiPANEL KOMMANDO« enclosure. A small recess in the framework enables almost flush integration of the PC here. Furthermore, front plates can be inset in the frame from the front or rear, and fastened in place with clamping pieces. The combination of direct panel installation and a part front plate is also possible.
With the flat multiPANEL 70 version, the rear wall is optionally available with a flush rear wall, which can be supplied as a fully bolted version or with hinges where required. A robust, 15mm deep, framed door including lock and internal hinges offers a greater installation depth. This results a multiPANEL enclosure depth of 85mm. Furthermore, a 60mm deep framed door version is also available for an even greater enclosure depth, which is also equipped with a lock and internal hinges. The total depth with this version is 130mm. Internal mountings can naturally also be installed in the door. For this purpose, stays are fitted inside the door on request by the customer, in preparation for the technical installation. Furthermore, a circumferential groove is available inside the 60mm deep door, for mounting clamping pieces.
Made to customer required sizes
L x W x H max. 800 x 800 x 70/85/130 mm
Puristic, multi-variable design for modern machines
Profile enclosure – produced to the precise millimetre
Three enclosure depths: 70, 85 and 130 mm
Five front installation options
Direct access possible with three door designs
Aluminium corner pieces mounted with aluminium profiles
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle: POM RAL 9005, with stainless steel inlay V2A
Enclosure lock: rear wall bolted (only MPD 00 and MPK 00), lock and hinge, black
With the suspension arm system profiPLUS 50 Panel coupling
Slide-in contour for spring nuts M4/M5
IP 65 / EN 60529
Powder coating RAL 9005 Deep black, fine structure
Optional: other colours
Full Customising Service for installation-ready enclosures
Request form / Checklist
1. Browse the product sections or use the search feature, to find the right product.
2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.
3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.