multiPANEL application

Keyboard- and mouse tray available as accessories

profiPLUS / multiPANEL application

Combination of direct panel installation and a part front plate

multiPANEL Kommando for the direct installation of a panel PC

multiPANEL Kommando with front plate inset from the front

Installation-ready processing is our particular strength

Urban design for modern machines

Puristic, multi-variable design

Five practical options for front installation

Three depths: 70, 85 or 130mm

multiPANEL Display for permanent installation of a front plate or glass front for touch applications

Ergonomic handle for even more convenient handling

Body available in any chosen RAL colour

 
 

Individual HMI / Panel Enclosures

Advanced command enclosures for modern machine control

multiPANEL offers the option of integrating every conceivable application. The enclosure front of the »multiPANEL DISPLAY« facilitates the permanent installation of a front plate or glass front, e.g. for touch applications. Almost borderless, with flush installation and permanently connected with the enclosure. Suitable cut-outs for switches and more are included in the service provided by ROLEC, and are established in the production department at the German headquarters in accordance with customer specifications.

It is possible to directly integrate commercially available built-in panels in the front of the »multiPANEL KOMMANDO« enclosure. A small recess in the framework enables almost flush integration of the PC here. Furthermore, front plates can be inset in the frame from the front or rear, and fastened in place with clamping pieces. The combination of direct panel installation and a part front plate is also possible.

With the flat multiPANEL 70 version, the rear wall is optionally available with a flush rear wall, which can be supplied as a fully bolted version or with hinges where required. A robust, 15mm deep, framed door including lock and internal hinges offers a greater installation depth. This results a multiPANEL enclosure depth of 85mm. Furthermore, a 60mm deep framed door version is also available for an even greater enclosure depth, which is also equipped with a lock and internal hinges. The total depth with this version is 130mm. Internal mountings can naturally also be installed in the door. For this purpose, stays are fitted inside the door on request by the customer, in preparation for the technical installation. Furthermore, a circumferential groove is available inside the 60mm deep door, for mounting clamping pieces.

Generate PDF
 
 
 



Certifications

Enclosure sizes

Made to customer required sizes
L x W x H max. 800 x 800 x 70/85/130 mm

Additional info

Puristic, multi-variable design for modern machines
Profile enclosure – produced to the precise millimetre
Three enclosure depths: 70, 85 and 130 mm
Five front installation options
Direct access possible with three door designs

Material/Colour

Extruded aluminium
Aluminium corner pieces mounted with aluminium profiles
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle: POM RAL 9005, with stainless steel inlay V2A
Enclosure lock: rear wall bolted (only MPD 00 and MPK 00), lock and hinge, black

Fastening

With the suspension arm system profiPLUS 50 Panel coupling

Internal mounting

Slide-in contour for spring nuts M4/M5

Ingress protection

IP 65 / EN 60529

Gasket

Surface

Powder coating RAL 9005 Deep black, fine structure
Optional: other colours

ROLEC service

 Full Customising Service  for installation-ready enclosures

Documents / downloads

Here you'll find all of the technical information and certificates relating to multiPANEL

Approval

2,087 KB
 

Assembly instructions

6,440 KB
 

Gasket

596 KB
 

Ingress protection

294 KB
351 KB
 

Material

239 KB
251 KB
 

Request form / Checklist

1,330 KB
 

Surface

54 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2019 ROLEC · All rights reserved