bl1806-diecast-enclosures-c

Two-Chamber Diecast Aluminium Electronic Enclosures – aluTWIN (and aluFACE)

Many of the design features that helped to make aluNORM such a success are also available on ROLEC’s two-chamber aluTWIN (IP 66/67) enclosures. Single screw channels are even more important on an enclosure like aluTWIN because there are twice as many lid screws.

Its dual-lid configuration means you can open one compartment for maintenance or inspection without having to disturb the seal on the other. This is a real boon in challenging locations with a high likelihood of water or dust ingress.

ROLEC aluTWIN is available in four main sizes ranging from 166 x 100 x 55 mm to 240 x 240 x 103 mm. There are also two KTE variants with deeply recessed lids designed to protect large machine-control buttons.

KTE 160 (160 x 240 x 120 mm) and KTE 162 (240 x 240 x 120 mm) are listed in the aluFACE range because of their deep lids. To compare the KTE cases with the main four aluTWIN enclosures more easily, see the aluTWIN accessories page.

 
 
Benefit from our full service offer for installation-ready enclosures.
ROLEC FULL SERVICE
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2019 ROLEC · All rights reserved